✔️ What is the meaning of ceramic foam?
Over time, even the most beautiful stone surfaces may lose their shine and beauty. In such cases, even by studying the training of cleaning ceramics at home with natural materials, it is not possible to achieve the desired result. This is where you should think about footwear. In other words, floor cleaning means cleaning and polishing ceramic, mosaic and stone surfaces.
Carpeting is done with different methods, one of the most common and best of them is using a special carpeting machine. By grinding the surfaces, this device removes about 6 to 8 mm of the top and damaged layer and increases the shine of the stones.
✔️ What are the benefits of a foam?
1- Claiming makes ceramic surfaces shine.
The first and most important advantage of ceramic flooring is to increase the shine and shine on ceramic and stone coatings. You might think that washing ceramics with detergent will do the same thing, but you should note that even the strongest detergents are not strong enough to increase the shine of surfaces.
On the other hand, strong detergents may cause damage to the ceramic glaze, but you don't need to worry about possible damage by doing flooring.
1- The shelf life of ceramics and rocks increases.
An important thing that is effective in reducing the costs of receiving ceramic rework services is increasing the useful life of ceramics by performing flooring. Over time, the seams and gaps between ceramics make it easier for water and other materials to penetrate and eventually cause it to fail faster. By doing flooring, you can remove the seams and increase the life of the surfaces.
1- The seam and the high mail eliminates the surfaces.
As mentioned earlier, the presence of a seam reduces the life of ceramics and makes them deteriorate faster. In addition to reducing the low and high seams on the floor, it is also removed with a sanding stone. Finally, there are no seams or cracks between the ceramics and it gives a beautiful appearance to your home and workplace.
1- Restoring Ceramic Damage.
You know that the use of strong acid detergents may damage stone surfaces and ceramic floors. If you are not familiar with flooring services, the only solution available to eliminate these damages is to replace the ceramics. This advantage of ceramic flooring cannot be replaced by any other method because it eliminates all defects without causing further damage.
So, if the ceramics are damaged due to the use of any corrosive materials, you can remove the very thin damaged layer with flooring services and return the beautiful appearance of the past to your surfaces!
1- Even the oldest ceramics are renewed with foam.
If years have passed since tiling the house, the color of ceramic and tiles will change over time. To eliminate this dull and old look, you can also use flooring. Flooring removes the damaged upper layer due to dust, various chemicals and existing seams and gives a new look to the oldest ceramics.
So, if you don't want to spend a lot of money and time on choosing tiles, re-tiling and numerous dirty works, the best solution is stone and ceramic flooring with the help of special equipment and specialized methods.
1- Ceramic foam also destroys sticky materials on ceramics.
Even if you have recently moved furniture, traces of materials such as cement, glue and other building materials may remain on the ceramics. Using sharp tools to remove these dried or sticky materials may damage the ceramic glaze and cause scratches on it. But by using a special floor cleaning machine, you can remove even the hardest materials from ceramics.
This issue may also be observed during the cleaning of the staircase. For example, if you have used carpet on the stairs for a long time, if you remove the carpets, there will be traces of glue on the stairs. In this case, to remove these sticky materials, flooring is the best option.
✔️ How many ways are done?
Now that we are familiar with the various methods and devices for ceramic flooring, it is time to check the steps to do it. These steps are respectively:
The first stage of flooring is done to make the ceramics even, eliminating the low and high points. To perform this step, a sub with a 46 bite is used.
In the next step, the seams are filled and dust and other materials are prevented from penetrating. For this purpose, in other words, puttying the subsurfaces with a 60 bit is prepared and flooring is done.
In the third step, subbing is done with pad 100 and 200, respectively, to remove all the lines on the ceramic. At this stage, the surfaces will have a matte appearance.
The fourth step is to start polishing the stone by grinding, which is done with a lacquer bit. Of course, at this stage, there may be a risk that will disappear completely in the next stages.
In the fifth stage, 600 fine lines created in the previous stage are also removed. Then, in the sixth and seventh steps, Saab with 800 bite and Sinax bite are used, respectively.
The eighth step is done with the help of the Italian Saab to make the stone and ceramics shine more. The Italian sub is repeated 4 times and finally the process ends.
✔️ How long does it take?
The time spent on flooring depends on various factors. Among these factors, we can mention the size of the place, the type of ceramic, the type of flooring machine and the skill of the expert. Normally, in a residential project, one person with a single-phase machine can do 50 to 60 meters of flooring in one day. Of course, this number may decrease or increase depending on the factors mentioned.